Packs of Extra Large SpillTector® Replacement Pads

Fentex Spill Tector Extra Large Replacement Pads

Key Features:

• Available in packs of 2, 5 or 10

• For higher quantities with greater discounts call our Sales Team on 0800 250 2012

• Tray not included.

• Mat Dimensions: 1370mm x 2000mm x 100mm

• Absorbency: 32 Litres per mat

SpillTector®

OIL and FUEL LEAKS – TRAPPED

• Put SpillTector® under small plant, machinery and tanks to trap and absorb oil and fuel leaks without any interruption to the job.

• Oil and fuel leaks are trapped in a unique sorbent laminate while clean rainwater is allowed to run away, allowing work to continue without harm to the environment.

Features:

• Twice the absorbency of other spill traps

• Up to 40% less expensive than other spill traps

• Exceeds Environment Agency requirements for this type of spillage protection

• FLEXIBLE sidewalls allow plant and machinery to be wheeled into place easily

• TOUGH mesh grid withstands heavy use while allowing oil to soak into sorbent material

• ABSORBENT Laminate traps oil and fuel leaks but allows rainwater to run away

• EVO Technology Burst cotton fibre technology for unrivalled oil absorbency and retention

UNIQUE SORBENT LAMINATE

• HEAVY-DUTY, high-profile edging enhances robust construction

• TOP LAYER of tough, durable plastic mesh prevents damage from plant and machinery

• HYDROPHOBIC ABSORBENT LAYER rejects rainwater and only absorbs oils and fuels\

• EVO ‘burst cotton fibre technology’ LAYER gives SpillTector® unrivalled oil absorbency and retention

• IMPERMEABLE MEMBRANE evenly spreads the oil and fuel throughout the top two absorbent layers

• BASE LAYER of hydrophobic oil and fuel absorbent adds secondary protection to escaping water

SpillTector® fits under a wide range of plant and machinery to trap oil and fuel leaks.

• Clean rainwater simply won’t be absorbed and is safely channelled away enabling SpillTector® to continue working even in bad weather.

• Meanwhile the ground underneath stays protected from oil and fuel leaks, eliminating the need to spend time and money on ground remediation.

Replacement SpillTector® Mats

• When SpillTectorSpillTector® oil sorbent mat becomes saturated simply replace it with a new one to maintain 100% efficiency.

• Product Application: This product can be used to contain and absorb oil, fuel, diesel and petrol leaks, whilst channeling away clean rain water.

• Customer Suitability: Ideal for use on construction sites, farm yards or any external area where machinery is temporarily sited.

 ** Please note: Delivery to addresses other than UK mainland will incur additional delivery charges. Please see our Terms & Conditions for excluded Post Codes. Please call us for an accurate delivery cost prior to ordering **

See our full range of Spill Kits we sell at Direct365. You can also browse our full range of Secondary Containment equipment and supplies, which are also in stock and ready for quick dispatch.