Fentex Medium SpillTector & Absorbent Mat (Single or 5 Pack)

Fentex SpillTector with Absorbent Mat

OIL AND FUEL LEAKS – TRAPPED

Put SpillTector under small plant, machinery and tanks to trap and absorb oil and fuel leaks without any interruption to the job.

• Oil and fuel leaks are trapped in a unique sorbent laminate while clean rainwater is allowed to run away, allowing work to continue without harm to the environment.

• Twice the absorbency of other spill traps

• Up to 40% less expensive than other spill traps

• ​Exceeds Environment Agency requirements for this type of spillage protection     

Key Features:

• FLEXIBLE: Sidewalls allow plant and machinery to be wheeled into place easily.

• TOUGH: Mesh grid withstands heavy use while allowing oil to soak into sorbent material.

• ABSORBENT: Laminate traps oil and fuel leaks but allows rainwater to run away.

• EVO TECHNOLOGY: Burst cotton fibre technology for unrivalled oil absorbency and retention.

UNIQUE SORBENT LAMINATE

• HEAVY-DUTY: high-profile edging enhances robust construction

• TOP LAYER: of tough, durable plastic mesh prevents damage from plant and machinery

• HYDROPHOBIC ABSORBENT LAYER: rejects rainwater and only absorbs oils and fuels

• EVO ‘burst cotton fibre technology’ LAYER: gives SpillTector unrivalled oil absorbency and retention

• IMPERMEABLE MEMBRANE: evenly spreads the oil and fuel throughout the top two absorbent layers

• BASE LAYER: of hydrophobic oil and fuel absorbent adds secondary protection to escaping water

SpillTector fits under a wide range of plant and machinery to trap oil and fuel leaks.

• Clean rainwater simply won’t be absorbed and is safely channelled away enabling SpillTector to continue working even in bad weather.

• Meanwhile the ground underneath stays protected from oil and fuel leaks, eliminating the need to spend time and money on ground remediation.

Replacement SpillTector Mats

When SpillTectorSpillTector oil sorbent mat becomes saturated simply replace it with a new one to maintain 100% efficiency.

Available separately.

Product Application

This product can be used to contain and absorb oil, fuel, diesel and petrol leaks, whilst channeling away clean rain water.

Customer Suitability: Ideal for use on construction sites, farm yards or any external area where machinery is temporarily sited.

Technical Specifications

Dimensions: 550mm x 700mm x 100mm

Absorbency:  Small: 4 Litres

                        Medium: 9 Litres

                        Large: 18 Litres

                        Extra Large: 32 Litres

Packs of replacement mats available.

 ** Please note: Delivery to addresses other than UK mainland will incur additional delivery charges. Please see our Terms & Conditions for excluded Post Codes. Please call us for an accurate delivery cost prior to ordering **

* SpillTector is a registered trademark

See our full range of Spill Kits we sell at Direct365. You can also browse our full range of Secondary Containment equipment and supplies, which are also in stock and ready for quick dispatch.